Zerg vs. Protoss Guide

From Liquipedia StarCraft Brood War Wiki
[e][h]ZergZerg vs. Protoss - Openings
Late game ZvP
Strategy Information

Early Game[edit]

Standard Build Orders[edit]

Early game builds can be separated into Pool first builds and Hatchery first builds. The early game is primarily devoted to building up your economy rather than actually assaulting the Protoss due to the relative safety of the Protoss Forge Fast Expansion. There are some exceptions, but it is generally hard to take advantage of a good Protoss wall in the early game unless it is either poorly constructed or he carelessly leaves openings in his wall.

Standard opening builds to choose from are as follows. A quick overview is provided, but a more detailed summary is provided in the main article.

  • 9 Pool Speed - An aggressive build that has generally fallen out of usage.
  • 9 Pool - A build that gets a fast Pool, but keeps a relatively strong economy.
  • Overpool - A slightly slower Pool, but gets the strongest economy while still taking the initiative with Zerglings.
  • 12 Hatch - The most economical build order, but also the riskiest. It is still generally safe.

Build Order Comparisons[edit]

Choosing the proper early game build order will undoubtedly depend on either the map or an overall strategy that you have planned out. In general, 12 Hatch is the best option on 4 Player maps with few exceptions, and 9 Pool or Overpool is best on all other maps. This is because of early game Protoss scouting patterns. In the modern Forge FE, Protoss players will always scout after their initial Pylon. If the Probe takes a direct path to your main and natural, then the Protoss can deny your natural with the Probe for a long time since you will not have Zerglings out to fend off the Probe. Therefore, it's much safer and easier to just 9 Pool or Overpool and take a fast Natural Hatchery immediately after. This provides solid protection against any 2 Gate builds that the Protoss does. In addition, the presence of early zerglings forces the Protoss to build 1 or 2 cannons before his nexus, thus slowing his economy and negating the economic hit the Zerg takes for going pool first.

9 Pool Speed is almost never seen today because it offers an extremely poor economy for little payoff. The danger it poses is quickly negated by a proper wall-in by the Protoss.

(Note: Work in Progress - Feel free to edit this as you please)


Early game Zerg cheeses revolve around a quick Pool and ending the game before Cannons can go up for the Protoss.

Greedy Build Orders[edit]

These builds tend to be much less common, as this delays fighting units as well as tech for longer than usual. Generally these builds transition into a more late game driven strategy such as 5 Hatch Hydra.

Midgame: Lair Tech[edit]

In most ZvP's, this is the longest part of the game, and is therefore highly variable. This stage in the game is usually characterized by the Zerg attempting to both hold off the Protoss army and prevent Protoss from securing their third base. Zerg should also ideally be looking to secure a fourth gas, which creates a much stronger foundation for Hive tech.


There are two major lair tech branches- the mutalisk and the lurker. Both of the tech choices counter aggressive zealot pushes very well and are designed to defend against Psionic Storm. Neither of them directly counter corsair/reaver or corsair/dt, but with micro and planning, both can prevent corsair reaver and corsair dt from doing damage to your economy.

Spire First[edit]

With a spire first, you can use your muta to snipe ht as they come out, as well as force the protoss player to build cannons in their mineral lines, and reach a critical mass of corsairs before they can move out. If you can go spire first correctly, you can force the protoss player to take even longer to reach a critical mass of corsairs, and allow your economy to build up as much as possible. Also, going spire first allows you to keep the first scouting corsair inside of the protoss player's base, and allows you to see what the protoss player is doing (either Sair/Reaver or Sair/DT)

Hydra Den First[edit]

With a hydra den first, you can force the protoss to stay contained inside of their base with their ground forces. Storm Dodging is a must, as psistorm is the only attack that really allows protoss to do enough damage against a large hydra mass. A soft counter to a large number of hydralisks are zealots and reavers.


3 Base Spire into 5 Hatch Hydra (vs. Protoss)


ZvP Midgame cheeses generally take advantage of a specific timing where Protoss is extremely vulnerable to mass units. There is a small timing window right before the Protoss player gets Storm that can be exploited by Zerg. If the Protoss player doesn't add any additional Cannons past his original 2, then he'll have a tough time fending off these cheeses.

One extremely important element in these builds (as well as in all cheese) is denying the scout. All-in builds generally fail miserably if the opponent can scout exactly what you're doing and when you're attacking. The Zergling Speed upgrade mentioned above is one of the most effective ways a Zerg can deny scouting. By doing an Overpool or 9 Pool build a Zerg can get the speed upgrade very quickly, and quickly shut down any probe scouting attempts. This leaves the Protoss player in the dark, giving the all-in a much higher chance of success.

All-in Mutalisks[edit]

2 Hatch Muta (vs. Protoss) can be very effective if you can pull it off without being scouted. Protoss needs two cannons or so in their mineral lines to deal with 5 Muta, and you can spare one larvae to kill the first corsair. The timing is such that your Muta/Scourge end up getting there at about the same time that the first corsair gets out. The reason this build is an all-in is because of your limited Hatch count. With only two Hatches you'll have less Drones at your main and natural, as well as one less expansion than you regularly would. Because of this, you won't be able to tech switch nearly as easily as you can in a regular ZvP, so you will be locked into making Mutas for at least the early to middle portion of the game.

The ideal situation for this build is to completely shut down one Protoss Nexus, but even if you can't prevent them from getting Cannons in time, you can still inflict damage on their base.

At first you'll have a small group of Mutas. At this point you should fly around their base looking for spaces that aren't covered by Cannons to make Muta Harass that much easier. Some common examples include tech buildings that are too far from Cannons, and even better, an Assimilator. If you can keep attacking an Assimilator, you can not only cut down on a Protoss gas supply by eventually destroying it, but you can indirectly kill Probes thanks to the Mutas attack. While doing this with your initial group of Mutas, you should of course be pumping more Mutas as your Larva and gas allow.

When you have a decently sized group of Mutas (I would say seven Mutas and up), you can start taking advantage of the Muta Harass abilities and start doing hit and run attacks on Probes. You'll be able to eliminate them in one hit, and you should have enough Mutas to absorb enough Cannon hits to knock off Probes regardless. Again, the Probes mining gas will most likely be the easiest to pick off since they'll generally be farthest from the Cannons, but they'll hurt the Protoss the most as well by slowing down their gas supply, which is extremely important at this stage of the game.

If you see them pumping Sairs, they'll be keeping them around Cannons until they have a big enough group to kill Scourge and obliterate your Mutas. To prevent their numbers from growing too large, throw in some more Scourge along with your Muta pump, and snipe the Sairs by drawing cannon fire with Mutas.

Keep in mind that all of these things are done in a very short amount of time. All-in Mutas in ZvP depend on catching a Protoss player off guard, and when you succeed in that you need to keep them down the entire game, or at least enough to get your Hatch, tech, and expansion count up to finish them off with something else.

All-in Lurker Drop[edit]

Both of these builds can be modified with researching overlord drop. You almost never see these builds without drop because of the cannons in front of the natural in the standard Forge-first PvZ. Dropping the lurkers allows the player to bypass the cannons in the front to attack the Protoss main base.

Late Game: Hive Tech[edit]

The Protoss late game army will generally consist of a mixture of zealots, dragoons, high templar, archons, and dark templar. Generally, the proportion of zealots and archons are greater than the other units. The standard Zerg late game army should consist of ultralisks, zerglings, and defilers, although this can change if the Protoss wields an unusual unit composition (such as mass corsair and dark templar). Zerglings should be fully upgraded and are the primary damage dealers of the army while the ultralisks are meant to soak up damage from the enemy units.

Sometimes, Protoss players that did the Corsair/Reaver build in the Mid-Game will opt to transition into carriers and corsairs. This style of play is covered in its own section below.

Standard Late Game Zerg vs. Protoss[edit]

Late game Zerg vs. Protoss consists of a battle for bases between the two races. As Protoss's main and natural are generally depleted by this stage of the game, and Zerg's main and natural are running out, the naturals cease to be a major target. Zerg should focus on diverting Protoss's attention from base hunting as much as possible. This can be done by attacking Protoss expansions or dropping the Protoss main. A direct confrontation with the main Protoss army should be avoided until Zerg has +3 Carapace to match the Protoss +3 Attack since Zerglings die upon being hit twice if the attack upgrades of the zealot are higher than the carapce upgrades of the zergling.

Although nydus canals are not as useful in Zerg vs. Protoss as they are in Zerg vs. Terran, nydus canals allow for the Zerg army to flank a Protoss army that is trying to attack a base. However, caution must be exercised in using a nydus canal because a storm on top of it will destroy or severely damage any Zerg units that pop out of it. On maps such as God's Garden, Andromeda, or Neo Medusa, where there are 3 bases inside a standard main base, nydus canals should be used to deny the Protoss the opportunity of sniping hatcheries with zealots.

Although defilers do not see as much usage as against Terran, they remain very useful. Since Protoss expansions are generally guarded by cannons, a dark swarm accompanied by 12 cracklings can snipe a nexus relatively quickly. This tactic should be abused constantly, which forces the Protoss to keep high templar or reavers near the expansion unless he is willing to lose it. This will decrease the overall size of the Protoss army and remove 6 storms or 1 archon from the Protoss army for each expansion that the Protoss has. Dark Swarm has another major use; an army heavy on dragoons and archons (as late game Protoss armies often are) is far easier to fight under the swarm, which shuts down dragoon damage and reduces archons to splash damage only.

Defilers are also useful for their plague spell. This spell can halve the amount of damage that your forces need to do in order to defeat the Protoss army. Plague should be abused whenever possible because unlike Terran, the Protoss do not have any way of healing damage to hit points.

One important tactic in late game Zerg vs. Protoss is the use and abuse of drops. Cracklings (fully upgraded Zerglings) are very strong at taking down buildings. In particular, buildings can be focus fired by cracklings to take them down extremely quickly. It is particularly important to snipe key tech buildings, especially the templar archives, to stop production of archons for a short while. After the templar archives has been destroyed, cracklings should be used to target gateways or a large grouping of pylons to delay Protoss production.

Ultralisks can be included in drops to soak up damage, as well as defilers if the area has many cannons. However, it is important to read the army movements of the Protoss. If the Protoss is not moving towards your base to take out all of your tech, or an expansion to kill it, then he is returning to his base to take out the drop. While the Protoss is distracted with the units in his main, the Zerg main army should attack an expansion and take it out. Preferable targets are main bases where the Protoss might have two expansions. At the very least, taking out one expansion is crucial to defeating Protoss late game because the Protoss late game army is much stronger than the Zerg late game army given equal resources.

During the late game, some Protoss like to build around 5-7 corsairs and go overlord hunting. This is especially devastating for the Zerg because the standard Zerg late-game army lacks anti-air. Depending on the number of corsairs, either scourge or hydralisks are the counter. Scourge are gas-heavy and unreliable once the corsairs reach 5 or more in number, and in that case hydralisks should be built.

Along with the corsairs, a Protoss might make a switch to a Corsair/Dark Templar/Dragoon/High Templar army late game given enough bases. The proper counter is to not allow the Protoss to have so much gas in the first place, but if you encounter this army composition, then it is vital for Zerg to counter this properly. The Protoss will try to kill any accompanying Overlords with his dragoons and corsairs, leaving the Zerg army helpless. Zerg should shift production from Ultraling to Ultra/Hydra to counter this because the Protoss cannot have enough high templar with this build to effectively storm all the hydras, and the dragoons and dark templar form a wall preventing high templar from passing. Overlords should be set to follow the Zerg army rather than be grouped with it in a hotkey. A useful upgrade to have when facing this build is the Antennae upgrade for Zerg since it increases the sight range of overlords, allowing the Zerg to see the dark templar even with overlords farther back than usual.

A final note to keep in mind when fighting all late-game (or late mid-game) Protoss armies is the importance of watching for drops. Storm drops, DT drops and even zealot drops can devastate an unprepared zerg by slaughtering drones, killing tech buildings or even killing the hive. Properly positioned overlords and available scourge are essential for fending off drops.

Vs. Carrier/Corsair[edit]

If the Protoss was able to make the Corsair/Reaver build cost effective in the midgame and secured 3 or more gases in the midgame, then he may opt to transition to a Carrier/Corsair build. This build is only effective on maps where carriers in Protoss vs. Terran would be viable and where Corsair/Reaver is viable. These maps have several distinct features:

  • There must be a third base with gas on an island.
  • There must be a sufficient amount of cliffs on the map to micro carriers with.
  • There must be space that is either inaccessible to land units or where land units rarely go to allow mobility for the slow carriers.

Carrier/Corsair play on maps without these features is stupid and the Zerg will be able to take down the carriers in short fashion.


Once the Protoss has been revealed to have gone Carrier/Corsair, several spells are needed to counter the unit combination. First, it is crucial to get at least one Queen. While this unit does not see play in normal games, the parasite spell that it has is a vital component of the Zerg arsenal against Carrier/Corsair. By parasiting a carrier, the Zerg player now has vision over the entire carrier group and knows exactly where the group is going to strike next, allowing the Zerg the ability to prepare for the Protoss attack.

Another vital spell for fighting Carrier/Corsair is plague. When plague is cast on the carriers and accompanying corsairs, they become much easier to pick off. In addition, if plague is cast on the interceptors, then the AI of the interceptors will tell them to return to the carrier to heal, but since they're constantly being damaged, they will never come out again. Therefore, the carrier fleet is forced to retreat since it cannot fight. Finally, dark swarm completely nullifies the attack of the carrier and interceptors. Although the corsair can cast disruption web over the dark swarm, the duration of the disruption web is much shorter than that of the dark swarm, so the Protoss player will be forced to recast disruption web again.

The correct unit combination to counter a carrier/corsair army is hydralisk/defiler. The defiler provides the plague and swarm spells, and the hydralisk provides the anti-air. Occasionally, devourers are also seen, but only in small numbers. Some zerglings might also be included as consumable material for the defiler.

In terms of tech, Zerg should continue upgrading melee, ranged, and carapace since the Protoss might transition into a ground army, and upgraded zerglings are very efficient at tearing down buildings.

Economy should not be a problem since Zerg should have mass expanded against the corsair/reaver build that the Protoss was running.

Detailed Strategy[edit]

Once the parasite is on the carrier, the Zerg should be able to track the movements of the carrier fleet. Since the carrier fleet is very, very slow and you know where it is, the Zerg player should abuse drops as much as possible on Protoss expansions and the Protoss main base. When the Protoss fleet is away from an expansion, it should be attacked through drops or a direct assault with a small squad of hydra/ling/defiler. This unit composition nullifies the cannons that will be guarding the base, and any leftover reavers will attack the zerglings while the hydralisks snipe them.

Remember that against corsair/carrier, a small group of hydras with defiler support can hold almost indefinitely against the carrier fleet. So if the protoss decides to counterattack against your base with his fleet while you're destroying his expos, throw down a dark swarm and hide your hydralisks underneath it. If the Protoss tries to run past, run out from underneath the dark swarm and snipe his carriers.

If the corsair count is dwindling, then don't forget that scourge is a viable option. A good tactic is to engage the Protoss with a small amount of devourers that keep the corsairs distracted (make sure they have air carapace upgrades) while scourge come in from behind and snipe carriers.

If you can keep the base count of the Protoss down while maintaining your base count, then you'll win because carriers are very expensive in terms of resources. Each carrier costs 550 minerals and 250 gas (including interceptor cost).